Flat 3 Cremer Street Home User Guide

Touchscreen

Control Type Reset

Control Types

Home Bar

Figure 6: Lighting Settings Screen

Figure 5: Control Type Screen

 Selecting A Control Type

The first screen you will see when powering your touchscreen is the control type select screen Once you have selected your desired control type you will be presented with screens that suit your installation. If you have selected an incorrect control type, then it is possible to edit it by following the instructions in the “editing your control type” section below.

 Home Bar

Depending on which control type you pick you will see a specific home bar at the bottom of each screen.

Audio On/Off – This will turn ALL audio Off and your current selected Audio ZONE On Home Button – This will return you to the home screen Light On/Off – This button will turn ALL lights On/Off Zone On/Off – This button will turn the selected ZONE On/Off

 Editing your control type

From the “Home Screen” press “Lighting” and you will be taken to the “Add Zone Screen” shown in Figure 8. You will need to make sure the screen is unlocked (See Locking/Unlocking the Add Zone Screen Below). Next Press and hold on any zone buttons, you will be taken to the “Lighting Settings Screen” shown in figure 6. Now press the Reset button in the top right of the screen. You will now be taken to the “Control Type Screen” shown in Figure 5.

7