Flat 3 Cremer Street Home User Guide

Capacitive & Mechanical Button Plates

Circuit Buttons

Scene Buttons

Figure 3: Capacitive Touch Plate

Figure 4: Mechanical Button Plate

 Selecting a Scene

Quickly press any button marked SCENE or SCN. The LED on the Button you pressed will illuminate to indicate a scene has been selected.

 Turning Off a Zone

By pressing the Scene button which is illuminated you will turn off all the circuits within that zone. The LED on all the Scene Buttons within that zone will now faintly illuminate to indicate that no scene is currently selected.

 Toggling a Circuit

Any button marked with a bulb is by default programmed as a momentary circuit. Tapping the button quickly will toggle the circuit between off & it’s last known light level.

 Dimming a Circuit

Press and hold any button marked with a bulb. The circuit will start to dim, let go of the button when you want the circuit to stop dimming. Press and hold the button again to dim the circuit in the opposite direction.

 Saving a Scene

Dim all the circuits within the desired zone to the level you require for your scene. Press and hold the desired scene button. The LED’s on the wall plate will flash several times. Once the LED’s have stopped flashing, your scene has been saved. You can now release your finger from the scene button.

6