Flat 3 Cremer Street Home User Guide

Lock/Unlock

Zone Buttons

Figure 7: Add Zone Screen

Figure 8: Add Zone Screen

 Adding a Lighting Zone

On the “Add Zone Screen” shown in figure 7 press the Add Zone button, this will take you to the “Lighting settings screen” shown in figure 6. You will need to edit all of the properties by pressing the “?” buttons next to each property. Lighting Zone – This can be found on the back of your lighting Panel schematic Rename Zone – This will be the name of the zone you are adding Rename Scene – The Scenes in each zone can be re-labelled e.g. Breakfast, Evening, Dim, etc Number of Circuits – This can be found on the back of your lighting Panel schematic Define Circuit Number – This can be found on the back of your lighting Panel schematic Rename Circuit – The Circuits in each zone can be re-labelled e.g. Pendant, Downlight, etc Once these are correct then click save, you will now be returned to the “Add Zone Screen” with your new zone added.

 Editing a Lighting Zone

Make sure editing is Un-locked by following the instructions below in the “Locking/Unlocking the Zone Screen” section. Press and hold on any zone button, this will open the “Lighting Settings Screen” for that zone. Click on the “?” next to the property which you need to edit. After making the appropriate changes click on the save button to confirm your changes.

 Deleting a Lighting Zone

Make sure editing is Un-locked by following the instructions below in the “Locking/Unlocking the Zone Screen” section. Press and hold on any zone button, this will open the “Lighting Settings Screen” for that zone. Click on the delete button, you will now be returned to the “Add Zone Screen” with your zone deleted.

8