Flat 3 Cremer Street Home User Guide

Remote Control

Scene Buttons

Circuit Buttons

Scene Adjust Buttons

Zone Off Button

Number Adjust

Figure 14: IR Remote Control

 Selecting A Scene

Quickly press any of the Scene buttons to recall that scene

 Saving a Scene

Press and hold any scene button to save the current circuit light levels to that scene

 Turning Off a Zone

Quickly press the zone off button to turn off the selected zone. The zone you are controlling is determined by how the IR receiver has been programmed in the wall plate software.

 Toggling A Circuit

Tapping any circuit button quickly will toggle the circuit between off & it’s last known light level.

 Dimming A Circuit

Press and hold any circuit button. The circuit will start to dim, let go of the button when you want the circuit to stop dimming. Press and hold the button again to dim the circuit in the opposite direction.

 Number Adjust

Pressing the number adjust button will move the scene and circuit buttons from the 1-4 range to the 5-8 range. Once a scene or circuit button is pressed the range will revert to 1-4.

12