Flat 3 Cremer Street Home User Guide

Home & Away

Record Button

Play Button

Figure 13: Home and Away Module

 Start/Stop Recording Mode

Press and hold the record button for roughly 3 seconds to start or stop recording. When the record button LED is lit the device is in Record mode. You cannot put the device into record mode when it is playback mode.

Note – Putting the device into record mode erases all the current events stored within that day.

 Start/Stop Playback Mode

Quickly tap the play button to start or stop playback mode. When the play button LED is lit the device is in playback mode. You cannot put the device in playback mode when it is in record mode. If there are no events stored the LED’s will flash multiple times and the device will not enter playback mode. Playback mode will only ever playback full days of events if a day does not have any events saved it will be skipped.

 Clear Memory

Press and hold the Record button for roughly 10 seconds, the LED’s will start to flash. Once the LED’s have stopped flashing the device memory has been wiped.

Note: Playback will run continuously until stopped. In the event of a power failure playback mode would continue after the power has resumed.

11