Flat 3 Cremer Street Home User Guide

Back Button

Zones/Circuits Found

Loading Bar

Accept

Reject

Figure 31: Lighting Discovery Screen, Running Discovery

Figure 32: Lighting Discovery Screen, Discovery Complete

Running Discovery



On the Lighting Zone Select Screen, pressing the Discover Zones and Circuits button will start the lighting discovery process. From the Lighting Discovery Screen press the Start Discovery Button to initiate the discovery. You will start to see Zones and Circuits being discovered as the loading bar increases. Once the discovery is complete you can choose to accept or reject the results. Accepting the results will save the discovered set-up to memory.

Note: Running a discovery will wipe any previously saved set-up. It is advised to not run a discovery unless necessary to do so.

Manually Adding Zones



On the Lighting Zone Select Screen, pressing the Manual Add Zone button will open the Manually Add Zone Screen. On this Screen you will need to enter the desired: Zone Name, Zone ID, Number of Circuits and then click the Add button. You will now see your manually added zone on the Lighting Zone Select Screen.

21