Flat 3 Cremer Street Home User Guide

Back Button

Define Zones

Define Circuits

Run Discovery

Figure 17: iOS App Lighting Settings Screen

Figure 18: iOS App Lighting Settings Screen (Discovery enabled)

 Running Discovery

On the Lighting Zone Screen, press edit to bring up the Lighting Settings Screen, next press the Discover Button to initiate the discovery (Discovery mode must be enabled). From the Lighting Discovery Screen press the Start Discovery Button to initiate the discovery. You will start to see Zones and Circuits being discovered as the loading bar increases. Once the discovery is complete you can choose to accept or cancel the results. Accepting the results will save the discovered set-up to memory.

Note: Running a discovery will wipe any previously saved set-up. It is advised to not run a discovery unless necessary to do so.

Manually Adding Zones



Start by clicking the edit button on the lighting zone screen. Next click on the define Zones button. Now click on the Add Button. From here you can enter the Zone Name/Number information. Click save to save the changes.

14