Flat 3 Cremer Street Home User Guide

Installer Section

Installation Guide

LOCATE CORRECT SITING POINT 1

ALARM SHOULD BE CEILING MOUNTED AT LEAST 300mm FROM WALLS & OBSTRUCTIONS, IDEALLY CENTRALLY IN ROOM/AREA

FIX & WIRE BASEPLATE 2

WIRE TO TERMINALS ON THE BASEPLATE AND FIX BASEPLATE TO CEILING USING THE FIXINGS PROVIDED

SLIDE ON ALARM 3

SLIDE ALARM ONTO BASEPLATE. A CLICK SHOULD BE HEARD AS THE TAMPER-PROOF CATCH ENGAGES

TEST ALARMS 4

PRESS ANDHOLD THE TEST BUTTONON THE ALARM. THE ALARMAND ANYOTHER INTERCONNECTEDUNITS SHOULD SOUND

Alarm Removal

LOCATE REMOVAL SLOT & INSERT SCREWDRIVER 1

LOCATE THE ARROWON THE FRONT FACEOF THE ALARM THE SLOT IS LOCATEDDIRECTLY ABOVE THE ARROW INSERT A FLAT-BLADED SCREWDRIVERHORIZONTALLY APPROX. 1cm INTO THE CENTREOF THE REMOVAL SLOT

SLIDE ALARM OFF BASE & REMOVE ALARM 2

WITH THE SCREWDRIVER STILL INSERTED, PUSH THE LOWER HALF OF THE ALARMAWAY FROMTHE SCREWDRIVER, IN THE DIRECTIONOF THE ARROWON THE COVER

11