Flat 3 Cremer Street Home User Guide
(4) If alarm does not stop, switch off mains and remove unit - see “Important Information” section. (Only remove the alarm with the red light flashing, the others are probably satisfactory). 2. LOW BATTERY & OTHER BEEPS: Check the green mains power light is on. If not, check fuse, circuit breakers and wiring connections. If the green light is off, the Lithium cells will deplete after some months without mains and will need to be recharged. If turning on the mains fails to stop the beeps, a fault may exist. Switch off mains and replace the unit. (1) If the green mains light is on and recharging the Lithium cells or cleaning the unit has not stopped the beeps, a fault may exist. Disconnect the mains first and replace the unit - see “ALARM REMOVAL” diagrams in the Installer Section. (2) If the Ei166e beeps without the red light flashing at the same time, the chamber is defective. The Alarm can be returned to the manufacturer for repair or replacement - see “Service and Guarantee” section. 3. INTERCONNECTED ALARMS DO NOT ALL SOUND: (1) Hold “> <” button for 10 seconds after first Alarm has sounded to ensure signal is transmitted to all units. (2) One or more of the connections may not be correctly connected. We recommend you consult a qualified electrician.
8
Made with FlippingBook PDF to HTML5