Flat 3 Cremer Street Home User Guide

(6) If the Alarm is fitted with an RF Module, ensure that there are no problems with the other RF interconnected Alarms and that all Alarms are housecoded correctly. (7) Press the test/hush button to silence the Alarm. If the CO Alarm continues to sound it is possibly defective and should be replaced (see ‘ Getting the CO Alarm Serviced ’ section). WHAT TO DO IF THE ALARM BEEPS: The CO Alarm will beep and the amber light will flash to indicate a fault condition.

CO Alarm Fault Chart

Fault Condition Fault Indication

Action

Ei208 Models

Ei207 Models

Low Battery

1 beep with 1 amber flash

Replace Battery

Replace Alarm

Faulty Sensor

2 beeps with 2 amber flashes

Replace Alarm

Replace Alarm

End of Life

3 beeps with 3 amber flashes

Replace Alarm

Replace Alarm

Before replacing the battery, check the ʻREPLACE UNIT BYʼ label on side of unit. If the date has been exceeded, replace the alarm not the battery.

31