Flat 3 Cremer Street Home User Guide

5. Alternatively, if desired, the CO Alarm will also free stand on a flat surface with the mounting plate attached. 6. If using the RadioLINK interconnection, ensure the RF module is fitted correctly into the base of the Alarm. For further advice on the RadioLINK installation, see booklet “ RadioLINK Module for Battery Powered Carbon Monoxide Alarms ”. 7. Carefully line up the Alarm on the base, gently press home & twist on – see figure 4. (This connects the batteries). The red, amber & green lights will immediately flash in sequence to show they are working. In addition, the icons on the LCD display on the Display models will briefly light up.

Red Light

Amber Light

ALARM

FAULT POWER

CARBON MONOXIDE ALARM

Green Light

Test Button

Figure 5

Figure 6a

Figure 6b

Figure 7

16