17-48 Melfield Gardens

Sliding Door

The sliding sash can be verti cally adjusted. Slide the door out and loosen the locking screws on the bottom fittings.

Adjustment video : tiny.cc/fSlideHeight

Locking screw

Pinch hazard!

Pinch hazard!

Using a round Ø4 mm pin (pos sibly a drill bit), the innermost bushing in the bottom fitting may be turned to raise or lower the sash. It may be neces sary to relieve the fitting of its weight during the adjustment procedure. After adjusting, retighten the bottom fitting’s locking screws.

2. Locking screw (not visible from this angle)

1. Vertical adjust ment

24