17-48 Melfield Gardens

7.3 Convertion from manual to electric

7.3.1 Cut the spindle into two parts.

7.3.2 Remove the bolts for

Loosen the stop rings on each side of the spindles. Then push the spindles away from each other.

fastening the transmission, and remove the transmission from the spindle.

7.3.3 For worktop length 60-104 cm one motor is mounted. For mounting of motors return to 7.3.7 Together with the mounting bracket

7.3.4 For worktop length 105-300 cm two motors are mounted. For mounting of motors return to 7.3.7 Together with the mounting bracket there is a nut, which fits into the grove at the bottom edge of the aluminium profile. When you start tightening the bolt, the nut will turn and interlock in the groove.

there is a nut, which fits into the grove at the bottom edge of the aluminium profile. When you start tightening the bolt, the nut will turn and interlock in the groove.

Page 15