17-48 Melfield Gardens

6.9.3 Loosen one of the M4-screws of the stop ring and pull the

6.9.2 Insert the assembled spindle into the transmission.

transmission spindle out to the required position in relation to the front fascia. Retighten the screw.

6.9.4 Pull the spindle suspension fitting forward so that it may be fitted under the worktop and fasten it with screws. Push the ”small” stop ring forward against the fitting and tighten the M4-screw.

6.9.5 Finally fit the handle.

When the frame has been assembled, tighten all screws securely.

Page 12