17-48 Melfield Gardens

3.4.3 Maximum (BOOST) for a specific duration It is possible to set a timer on the airflow setting PRESET 3. This way you do not need to change the airflow setting back after a party, cooking or showering. You just set the expected time you need airflow setting PRESET 3. 1. Navigate to TASK MENU as instructed in the chapter “How to navigate through the unit menu”. 2. Navigate to BOOST. 3. Navigate to TIMER. 4. Select the desired duration with the up and down button. 5. Select CONFIRM.

TASK MENU

BASIC MENU

RESET ERROR TASK MENU

AUTO/MANUAL BOOST VENTILATION AWAY

STATUS FILTERS

BACK

CONFIRM

BACK

CONFIRM

1

2

BOOST DURATION

BOOST

40 MIN

TIMER OFF

To stop the boost before the timer ends: 1. Repeat step 1 and 2. 2. Navigate to OFF.

BACK

CONFIRM

BACK

CONFIRM

3

5

4

3.4.4 Stop the airflow for a specific duration When desired, the supply or extract fan of the unit can temporary be turned off. Turning the supply fan off may be desired to keep out unpleasant odours from outside. 1. Navigate to TASK MENU as instructed in the chapter “How to navigate through the unit menu”. 2. Navigate to VENTILATION. 3. Navigate to: ■ SUPPLY ONLY if you would like to stop extracting air; ■ EXTRACT ONLY if you would like to stop supplying air (if available). 4. Select the desired duration with the up and down button.

TASK MENU

BASIC MENU

RESET ERROR TASK MENU

BOOST VENTILATION AWAY TEMPERATURE PROFILE

STATUS FILTERS

BACK

CONFIRM

BACK

CONFIRM

1

2

EXTRACT ONLY

VENTILATION MODE

2 h

BALANCE EXTRACT ONLY SUPPLY ONLY

5. Select CONFIRM. 6. Select CONFIRM.

BACK

CONFIRM

BACK

CONFIRM

3

5

To restart the fan before the timer ends: 1. Repeat step 1 and 2. 2. Navigate to BALANCE.

4

Do not use this function to turn off the ventilation during disasters. Follow the instructions in the chapter “Introduction and safety” instead.

EXTRACT ONLY

SUPPLY FAN WILL BE TURNED OFF

BACK

CONFIRM

6

EN - 13