17-48 Melfield Gardens

Please note in a hybrid system containing CO / Heat / Fire / Smoke Alarms we recommend using an Ei3000 series Alarm as the hybrid link to the RF section of the system. (Please refer to the Ei3000MRF booklet for further clarification). Ensure the Alarms operate correctly - see TESTING YOUR ALARM in the user section. 2.8 Removing the Alarm

* Disconnect mains before removal *

Locate removal slot

Insert screwdriver

Locate the arrow on the front face of the Alarm. The slot is located directly above

Insert a flat-bladed screwdriver horizontally about 10mm into the centre of the removal slot

Remove Alarm

Slide Alarm off mounting plate

With the screwdriver still inserted, push the lower half of the Alarm away from the screwdriver, it the direction of the arrows on the cover

Hold the lower half of the Alarm and remove from the mounting plate by lowering the Alarm towards the floor

28